CANADIAN ON-ROAD NATIONALS

March 22 - 25 / 2018

Canadian Onroad Nationals Facebook Group

    Approved Non-Timing "Blinky" ESC's

    (Updated Feb. 12/2016)
    Manufacturer
    Part Number
    Name/Description
    Software Version
    Special Notes
    Airtronics 96338-1 Super Vortex Zero 96338-1 N/A This ESC may NOT be used with Sanwa/Airtronics RX-472 Receiver. Non-Timing Operation: See Technical details.
    Calandra Racing Concepts CRC4000 Advanced Electronics Black Diamond LV 2.1 software or higher Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1
    Calandra Racing Concepts CRC4002 Advanced Black Diamond 2.1 software or higher Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1
    Castle Creations Mamba Max Pro V1.26
    Dynamite DYNP1001 Platinum Sensored ESC Software not upgradable blue LED flashes when throttle is at neutral in zero-timing mode.
    G Force G0011 TS120 Series, Model #G0011 2.02 Red LED 0.184seconds/flash. Use programming box to set "Boost Timing" and Turbo Timing" to zero
    G Force G0089 G Force Model TS50 1.05 Always in non-timing mode. No timing options available
    Graupner GmbH & Co. GM-Genius 120 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
    Graupner GmbH & Co. GM-Genius 150 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
    Graupner GmbH & Co. GM-Genius 75 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
    Graupner GmbH & Co. GM-Genius 90 Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active V13.0 Users must use Mode 0-5 after factory reset or after delivery. Modes 6-9 have high speed timing, no LED blinking. No high speed timing is allowed to set with PC-software. Mode 2 is factory setting. If high speed timing, no LED blinking.
    Hacker motor Gmbh TENSORIC10 Tensoric 10 Competition ESC (160A) V3.0_120516 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
    Hobbico DTXM1300 Duratrax DE10 Brushless Programable ESC N/A A blinking green LED will be displayed when the ESC is at 0 (zero) degrees of timing and the throttle is at neutral. Also, if the ESC is at any advancement in timing the LED will be solid green
    Hobby Star (SKU) 360-10-066 Model 120A Turbo V2_11_000000 Blue LED 0.66 seconds/flash. Non-Timing: Use LCD Program card to set "D1:Boost Timing" to zero: "E1: Turbo Timing" to zero.
    Hobbywing 3000000000112600, 30112601, 30112602 XeRun XR 10 Pro XR-4.1.05 Red LED., 0.25 seconds/flash. Non Timing: Use program box to set items "4A:Boost Timing" and 5A:Turbo Timing" to zero
    Hobbywing 81020000(blue) or 81020011(black) Justock Club SPEC N/A Zero timing and non-adjustable
    Hobbywing SKU) 30112000 Justock Model XR10 V1_509_No Timing Red LED 0.26 seconds/flash. Always in Non-Timing mode
    Hobbywing 81020010(blue) or 81020011(black) Xtreme Stock 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
    Hobbywing 81020050 Xerun 60A-SD V2.1 (Blue) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
    Hobbywing 81020051 Xerun 60A-SD V2.1 (Black) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
    Hobbywing 81020170 Xerun 120A-SD V2.1 (Blue) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
    Hobbywing 81020171 Xerun 120A-SD V2.1 (Black) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
    Hobbywing 81020210 Xerun 120A-1S (Black) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
    Hobbywing 81020211 Xerun 120A-1S (Blue) 508 Zero timing – the RED LED Flashes when the ESC is active and throttle in neutral position.
    Hobbywing 81020310 81020320 81020330 Xerun-120A V3 Software V3.1_121129_beta ESC must use Profile #2, red LED on power button flashes when throttle is at neutral in non-timing mode
    Hobbywing 81020340 81020350 81020360 Xerun-120A V3.1 Software V3.1_121129_beta ESC must use Profile #2, red LED on power button flashes when throttle is at neutral in non-timing mode

    Hobbywing

    30112101001 Xerun-120A V3.1 Stock Spec V3.1_121129_Beta Activate non-timing w/program box to Profile 2. Red LED, 0..31 seconds/flash
    Hobbywing 30112121051 Xerun-120A 1S V3.1 V3.1_121129_Beta Activate non-timing w/program box to Profile 2. Red LED, 0..31 seconds/flash
    Hobbywing SKU 30112401 XeRun XR10 Stock Spec XR-4.1.01 Red LED, 0.25 seconds/flash Non-Timing Operations: Use Program Box to set items 4A:Boost Timing and 5A:Turbo Timing to zero
    Hobbywing

    SKU 30112603

    XeRun XR10 Pro 1S XR-4.1.01 Red LED, 0.25 seconds/flash Non-Timing Operations: Use Program Box to set items 4A:Boost Timing and 5A:Turbo Timing to zero
    Hobbywing SKU 30112751 XeRun XR10 Stock Spec 1S XR-4.1.01 Red LED, 0.25 seconds/flash Non-Timing Operations: Use Program Box to set items 4A:Boost Timing and 5A:Turbo Timing to zero
    Hobbywing SKU 30112000 Justock Model XR10 V1_509_No Timing Red LED 0.26 seconds/flash. Always in Non-Timing mode
    KO Propo 40051 VFS-1 BMC Ver 1.5 Contact Mfg for Firmware Upgrade Must use zero timing and zero Advanced Profile signified by blinking LED on switch.
    KO PROPO America 4100 BLZ-350 ESC N/A Set to zero timing in firware. Cannot program any timing into ESC
    Losi LOSB9500 1/10th Xcelorin Brushless ESC 01.01.30 Must use zero timing and zero Advanced Profile signified by blinking color LED
    Losi LOSB9503 MSC540BL-S Sensored ESC, 13.5T Limit N/A There is no timing function available with this. There is no LED indication.
    LRP 80960 Flow Competition 1.4 or 3.3 or 4.0 or 5.0 Zero timing – the Blue LED flashes when the throttle is in neutral position

    LRP

    80960 Flow Competition 4.4 Blue LED 1.28 seconds/flash. St Torque Timing (Mode 5) and Boost Timong (Mode 6) to zero
    LRP 80960 Flow Competition 3.8 Blue LED 1.28 seconds/flash. St Torque Timing (Mode 5) and Boost Timong (Mode 6) to zero
    LRP 80960 Flow Competition Software 5.4

    5.4

    Blue LED 1.30 seconds/flash. Non Timing: Set torque timing (Mode5) and Boost Timing (Mode 6) to zero
    LRP 80970 Flow Works Team 1.4 or 3.3 or 4.0 or 4.7 or 5.0 The blue LED flashes 1.28 seconds/flash when the throttle is in the neutral position
    LRP 80970 Flow Works Team 1.4 or 3.3 or 4.0 or 5.0 Zero timing – the Blue LED flashes when the throttle is in neutral position
    LRP 80970 Flow Works Team 3.8 Blue LED 1.28 seconds/flash Set Tourque Timing (Mode 5) and Boost Timing (Mode 6) to zero
    LRP 80970 Flow Works Team 3.8 Non-Timing: Set torque timing (mode 5 ) and boost timing (mode 6) to zero Blue LED 1.28 seconds/flash
    LRP 80970 Flow Works Team Software 5.4

    5.4

    Blue LED 1.30 seconds/flash. Non Timing: Set torque timing (Mode5) and Boost Timing (Mode 6) to zero
    LRP LRP80100 Ai Brushless Reverse N/A Non-updateable; SC has no modes that will give any timing increase.
    LRP LRP80150 Ai Brushless Pro Reverse N/A Non-updateable; SC has no modes that will give any timing increase.
    LRP LRP80400 SPX Brushless Super Reverse N/A Non-updateable; SC has no modes that will give any timing increase.
    LRP LRP80410 Crawler ESC N/A Non-updateable; SC has no modes that will give any timing increase.
    LRP LRP80450 SPX Brushless Bullet Reverse N/A Non-updateable; SC has no modes that will give any timing increase.
    LRP LRP80500 Sphere Brushless ESC N/A Non-updateable; SC has no modes that will give any timing increase.
    LRP LRP80705 SPX Zero N/A Non-updateable; Zero timing when power profile is set to 0. Red LED will flash in neutral to indicate zero timing
    LRP LRP80905 LRP SXX Comp V2 1.3,1.5 Mode 3 timing must be set to “0″ signified by blinking blue LED in neutral
    LRP LRP809055 LRP SXX TC spec V2 1.3,1.5 Mode 3 timing must be set to “0″ signified by blinking blue LED in neutral
    LRP LRP80910 SXX Stock Spec Brushless N/A Non-updateable. Mode 3 timing must be set to “0″ signified by blinking blue LED when in neutral.
    LRP LRP80915 SXX Stock Spec V2 4.2,4.4 Desc: For Spec zero timing mode, both mode 2 (torque) and mode 3(timing) must be set to zero. Blue LED will blink in neutral
    LRP LRP80999 SXX Mod and Stock Upgrade board V 3.1 Zero timing-BLUE LED flashing
    Maclan (SKU) MCL2003 MMax Pro MCL2003 V2.4 Alternating blue and orange LEDs, 1.00 seconds/cycle. Non-Timing operation: Use Pro Link programming card to set Run Mode to Race Blinky
    Muchmore 8809821046592 Fleta Euro V1.40 Green LED 0.25 seconds/flash. How to activate Non-Timing Operation: Not applicable: always in non-timing mode
    Muchmore ME-FLP2K Fleta Pro V2 Blinky V1.40 Green LED 0.25 seconds/flash Always in non-timing mode
    Novak 1730 Impact Brushless Racing ESC 000 Zero timing mode indicated by blinking whie LED. Note this is different than previous Novak ESCs
    Novak 1852 The Club ESC 000 NO timing in this ESC
    Novak NOV1708 GTB2 Sportsman ESC Low Profile 000 There is NO timing in this ESC. The White LED will blink during the start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF”.
    Novak NOV1709 GTB 2 Sportsman Racing Brushless ESC Desc: When all timing is OFF, then white LED will be OFF to indicate no timing active.
    Novak NOV1710 Novak GTB N/A
    Novak NOV1711 Novak GTB Spectrum N/A
    Novak NOV1712 Novak Slyder Drift N/A
    Novak NOV1731 Novak Havoc 1 Cell N/A
    Novak NOV1732 Novak Havoc Sport N/A
    Novak NOV1733 Havoc 3S Brushless ESC (this ESC can be run on 2S or 3S) No timing built into ESC
    Novak NOV1735 Novak Havoc Pro N/A
    Novak NOV1740 Kinetic Racing Brushless ESC Version 1.0 software or higher ESC must be set at Timing Level = 1 or Zero Timing (default)
    Novak NOV1741 Kinetic 1S Racing Brushless ESC Version 1.0 software or higher ESC must be set at Timing Level = 1 or Zero Timing (default) **Note, this ESC will be shipping in August 2010
    Novak NOV1743 OVAL SPEC 1S Brushless ESC 000 When NO timing in this ESC. The White LED will blink while powered on. If the white led is on then timing is active. NOTE this is different than past Novak ESC's
    Novak NOV1745 Havoc Pro SC Brushless ESC Version 1.0 software or higher ESC must be set at Timing Level = 1 or Zero Timing (default)
    Novak NOV1745 Havoc Pro SC w/XDRIVE ESC 000 There is NO timing in this ESC. The White LED will blink during the start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF.”
    Novak NOV1747 GTB3 N/A White LED, 1.35 seconds/flash, ESC is always in non-timing mode
    Novak NOV1748 GTB2 Low Profile W/XDRIVE ESC 000 There is NO timing in this ESC. The White LED will blink during the start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF.”
    Novak NOV1749 GTB2 W/XDRIVE ESC 000 The White LED will blink during the start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF.”
    Novak NOV1755 Pulse Brushless Pro 2S Racing ESC V0 Zero timing - the white LED flashes when the throttle is in the neutral position. Note: The WHITE LED blinking on this Novak ESC is different than previous Novak ESCs where the white LED would be OFF to indicate zero timing.
    Novak NOV1756 Pulse V2 N/A White LED, 1.35 seconds/flash, Non timing: Press and hold SET button until the yellow and red LEDs are lit. Release SET. If the LEDs flash once, and then repeat (indicating timing is off)press and hold the SET button until the LEDs scroll to save.
    Novak 1850 The Edge Brushless ESC w/Traxxas 000 There is NO timing in this ESC. The white LED will blink during start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF”
    Novak 1851 The Edge Brushless ESC w/Tamiya 000 There is NO timing in this ESC. The white LED will blink during start up to “prove” it works, but will remain off during all normal operation to indicate that timing is “OFF”
    ORCA OES112V1 ORCA Vritra VX-1Titanium Color V3.3 Zero timing mode indicated by BLINKING blue LED at neutral. Using ORCA program box, set the following settings: Timing 0 Degree, Turbo delay off, Turbo timing Off, Turbo interval to 0. Software version displayed on program box.
    ORCA

    OES112V1, OES12OV1, OES21BV1

    Vritra VX1 TITANIUM, ORANGE, BLUE 3.3 - 130715A Blue LED, 0.36 seconds/flash
    ORCA OES112V1, OES12OV1, OES21BV1 ORCA Vritra VX1 4.1 - 140419A Blue LED 0.36 seconds/flash. Under Stock or Modified mode, set Timing at 0; Turbo Timing at OFF.
    ORCA OES360VB, OES380VX, OES390VO ORCA Vritra VX TITANIUM, ORANGE,BLUE 3.3 - 130715A Blue LED, 0.37 second/flash
    ORCA OES360VB, OES380VX, OES390VO Vritra VX 4.1 - 140419A Non Timing: Set timing at 0, Turbo timing at OFF
    ORCA OES380VX ORCA Vrita VX Orange/Ti/Blue V3 Zero timing mode indicated by blinking blue LED at neutral. Using ORCA Program box set the following ESC settings. Timing 0 degree, Turbo delay off, Turbo timing off, Turbo interval to 0. Software version displayed on program box.
    ORCA OES610XT, OES620XO, OES630XB ORCA Vritra VXX 4.1 - 140419A To activate Non-Timing mode: Use program card to set ESC in Stock mode and set timing to zero
    ORCA OES610XT, OES620XO, OES630XB Vritra VXX TITANIUM, ORANGE, BLUE V3.3 - 130715B Blue LED, 0.36 seconds/flash
    ORCA OES810V3 ORCA Vritra VX3 4.2 - 140823A Blue LED, .36 seconds /flash
    ORCA OES920V1 ORCA Vrita VX3 1S 4.2 - 140823A Blue LED, 0.32 seconds/flash. Set "S1:Timing Start" to "Blinky", or "S2: Timing" to "0" and "S5: Turbo Timing" to "Off".
    R1 Brushless Motor Lab (SKU) R1DG200 R1 Series Digital 2 B418106 Green LED 0.41 seconds/flash. Non-Timing use Programming Box to set "D1:Boost Timing" and "E1:Turbo Timing" to zero
    R1Wurks 120A 2s R1Wurks Series 120A 2s V1.02_000000 Blue LED 0.66 seonds/flash Non timing: Programming Box set "D1:Boost Timing" and "E1: Turbo Timing" to zero
    R1Wurks 120A 1s R1Wurks Series 120A 1s V1.02_000000 Blue LED 0.66 seonds/flash Non timing: Programming Box set "D1:Boost Timing" and "E1: Turbo Timing" to zero
    REDS Racing TX120A REDS Racing Model TX120A (SKU) SPCO 0001 B398107 Non Timing Mode: Use program box to set Mode to Stock, or set Boost Timing to zero and Turbo Timing to zero
    Reedy 27000, 27001 Black Box 410R V2.9 Green LED, 0.22 seconds/flash. Non Timing: Use programmer to set "Misc Control/Run Mode" to Race Blinky
    Reedy 27002 Reedy Blackbox 800Z N/A Green LED 0.41 seconds/flash Always in non timing mode
    Reedy 27003 Reedy Blackbox 1000Z N/A Green LED TBD seconds/flash. Non Timing. Turn ESC on. Press and hold power button on until beeps and green LED blinks. Release power button. Fife times to step to timing menu. Press and hold power button until red LED blinks If necessary, press and release.
    Reedy 27004, 27005 Reedy Blackbox 510R B468314 Green LED, 0.42 seconds/flash. Non-Timing Operation: Use Blackbox Programmer2 to set Mode Select to Standard and 5A Tiing Level to Level 0
    Sanwa 107A54391A Super Vortex Stock N/A Blue LED 0.50 seconds/flash. Non Timing Operation: Press and hold the setup button for 4 seconds or more. The setup LEDs will flash, indicating the ESC is in Programming Mode. Release the setup button press and release setup button 3 times.
    Savox 21ESC1160001 Razor160A V1 Zero timing mode indicated by BLINKING blue LED at neutral
    Schuur Speed   Extreme SPEC N/A Blue LED flashes every .45 seconds
    Scorpion Power System S3-140 Vanguard S3-140 Vanguard_S3_ver40 Yellow LED 0.99 sec/flash. Non Timing: Use PC and USC link to set "4C:Timing Advance" to "0", "9A Activation method" for boost to "OFF", and "10A: Activation method" for turbo to "OFF"
    Scorpion Power System S3-80 Vanguiard S3-80 Vanguard_S3_ver40 Yellow LED 0.99 seconds/flash. Non-Timing: Use PCand USB link to set "4C: Timing advance to "0", "9A: Activation method" for boost to "OFF", and "10A: Activation method" for turbo to "OFF"
    Scorpion Power System S3-80 Vanguard S3-80 Turbo Stock Vanguard_S2_ver37 Green LED. 0.99 seconds/flash. Non Timing Operation: Use PC and USB link
    SkyRC Technology Co. Ltd. SK-300044-01 Toro Model TS120 2.01 Red LED, .19 seconds/flash. Non-Timing: Use program box to set boost timing and turbo timing to zero
    SkyRC Technology Co. Ltd. SK-300048-01 Toro Model 1S120 2.01 Red LED, .19 seconds/flash. Non-Timing: Use program box to set boost timing and turbo timing to zero
    SMC (SKU) RF-120-2S RF-120-2S B478105 Green LED, 0.41 seconds/flash. Non Timing Operation: Use program box to set boost timing and turbo timing to zero
    SMC (SKU) RF-120-2-3S RF-120V2-3S B478105 Green LED, 0.41 seconds/flash. Non timing operation: Use Program Box to set boost timing and turbo timing
    SMC RF-120-1S Model-120-1S B478201 Grean LED, 0.41 sec/flash. Use program box to set "Boost Timing" and "Turbo Timing" to zero
    SMC RF-120-2S Model-120-2S B478202 Green LED 0.41 seconds/flash. Non timing: Use program box to set
    SMC RF-170-1S RF-170-1S B478202 Green LED, 0.41 seconds/flash. How to activate non timing operation: use program box to set "boost timing" and "turbo timing" to zero. Use program box to set "boost timing" and "turbo timing" to zero.
    SMC RF-170-2S RF-170-2S B478106 Green LED, 0.41 seconds/flash. How to activate non timing operation: use program box to set "boost timing" and "turbo timing" to zero. Use program box to set "boost timing" and "turbo timing" to zero.
    SMC RF-170-2S RF-170-2S B478107 Green LED, 0.41 seconds/flash. How to activate non timing operation: use program box to set "boost timing" and "turbo timing" to zero. Use program box to set "boost timing" and "turbo timing" to zero.
    Speed Passion 12280 Cirtix Stock Club Race # 12280 Non-Programable No Timing adjustments-Signified by blinking LED
    Speed Passion EXT98802LPF LPF 2.1 ESC (Carbon, Silver, Blue) V508 Must use zero timing and zero Advanced Profile signified by blinking LED
    Speed Passion EXT98802LPFSxx GT2.1-EX ESC (xx=color,Carbon, Silver or Blue Version) V508 Must use zero timing and zero Advanced Profile signified by blinking LED
    Speed Passion EXT98802PROSxx GT2.1-ProStock ESC (xx=color, Black or Blue Version) V508 Must use zero timing and zero Advanced Profile signified by blinking LED
    Speed Passion EXT98802PROxx GT2-Pro ESC (xx=color, Carbon, Silver or Blue Version) V508 Must use zero timing and zero Advanced Profile signified by blinking LED
    Speed Passion SP000010 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
    Speed Passion SP000043 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
    Speed Passion SP000043 (Orange); SP000063 (Blue); SP000064 (Silver) Reventon R V1_1_0_24_stock0v21 Yellow LED on, Red double blink, pause, repeat every 1.84 seconds
    Speed Passion SP000048 Reventon Stock Club Race ESC ST0 (stock0) V20 There is no timing in this ESC, signified by blinking LED
    Speed Passion SP000060 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
    Speed Passion SP000061 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
    Speed Passion SP000162 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
    Speed Passion SP000062 (Silver); SP000060 (Orange); SP000010 (Blue); SP000061 (Black) Reventon S V1_1_0_24_stock0v21 Yellow LED on, Red double blink, pause, repeat every 1.84 seconds
    Speed Passion SP000222 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
    Speed Passion SP000063 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
    Speed Passion SP000064 Reventon V20 Zero timing mode indicated by blinking Red LED at neutral. Stock software file is STOCH0 Version 20 and is displayed on LCD and via PC software.
    Speed Passion SP000150 (black) Reventon Pro1.1 EX V1_1_0_24_stock0v21 Yellow LED on, Red double blink, pause, repeat every 1.84 sec.
    Speed Passion SP000162 (Laser Blue); SP000222 (Metal Black Silver) (Blue) Reventon Pro V1_1_0_24_stock0v21 Yellow LED on, Red double blink, pause, repeat every 1.84 seconds
    Speed Passion SP000739 (Silver); SP000740 (Blue); SP000150 (Black) Reventon Pro1.1 EX V1_1_0_24_stock0v21 Yellow LED on, Red double blink, pause, repeat every 1.84 seconds
    Team Novak 1755 Pulse Brushless Pro 2S Racing ESC V0 Zero timing- the white LED flashes when the throttle is in the neutral position. Note: The WHITE LED blinking on this Novak ESC is different than previous Novak ESCs where the white LED would be OFF to indicate zero timing
    Team Orion ORI65101 Vortex R10 Pro ESC (120A,1S-2S) 1.68 Zero timing = the RED LED Flashes when the ESC is active and throttle in neutral position.
    Team Orion ORI65102 Vortex R10 Pro ESC (160A,2S-3S) 1.68 Zero timing = the RED LED Flashes when the ESC is active and throttle in neutral position.
    Team Orion ORI65109 Vortex R10 Race ESC (90A,2S-3S) 1.68 Zero timing = the RED LED Flashes when the ESC is active and throttle in neutral position.
    Team Orion ORI65120 Vortex R10 Stock Zero Timing 1.71 Zero timing = the RED LED Flashes when the ESC is active and throttle in neutral position.
    Team Orion OR165128 Vortex R10.1 Pro V3.0_111208_MOD Red LED, 0.50 seconds/flash. Non Timing: set item 1. Running Mode to value "4: For/Bra-0," then set item "4:DRSS Punch" to value "9:Level9"
    Team Powers PRO-C-140A TP-RADON/PRO-C RS-Code-V1.1.xup Blue LED flashes .65 seconds
    Team Powers TP-Radon/Pro V2 Team Powers Radon pro V2 RS-Code-2.1 Blue LED 0.66 sec/flash. Non-timing: Connet program card to speed control and set the
    Team Powers TP-Radon/ProV2-1S-C Team Powers Radon Pro V2 1S RS-Code-2-2 Blue LED 0.66 seconds/flash. Non timing: Connect program card to speed control and set the "T1:timing boost" and "T6:turbo boost" mode to 0. Press update to confirm each setting value. Power down speed control.
    Team Powers TP-XPS Pro-C-V1.2 ESC Hardware Ver. 1.2 V0 Zero timing mode indicated by BLINKING green LED at neutral
    Team Powers TP-XPS EL-C40A ESC Hardware Ver. 1.2 V0 Zero timing mode indicated by BLINKING green LED at neutral
    Team Powers TP-XPS/Sport Sport-C-70 ESC Hardware Ver. 1.2 V0 Zero timing mode indicated by BLINKING green LED at neutral
    Tekin TT1152 Tekin RS ESC 223 ** NOTE NEW SOFTWARE PROFILE** When in LOCKED no timing mode LED 3, 4, 5 will be on and blinking.
    Tekin TT1153 Tekin RS Pro 223 ** NOTE: NEW SOFTWARE PROFILE When in LOCKED no timing mode LED 3, 4, 5 will be on and blinking.
    Tekin TT1154 Tekin RS Gen2 Electronic Speed Control 255 Zero timing locked SPEC mode - LED's 3, 4, and 5 flash for ROAR events. Unlocked zero timing is LED's 3, and 5 flashing
    Tekin TT1155 Tekin RS Spec Gen2 Electronic Speed Control 255 ESC is SPEC mode only- LED's 3, 4, and 5 always flash in neutral
    Tekin TT1158 RSX 250 Zero timing locked SPEC mode- LED's 3, 4, and 5 flash for ROAR events. Unlocked zero timing is LED's 3, and 5 flashing
    Tekin TT1158 Tekin RSX 255 Non timing: Press MODE button five times, then press INC button repeatedly until only one LED is lit. LED3 and LED5, 0.083 seconds/flash.
    TrackShrinker TRK600A TrackShrinker Series 600A, (SKU) TRK60 N/A Always in non-tiing mode
    Turnigy 9052000046 Trackstar 120A 1/10 Scale Sensored ESC Gen II 2.02 Use Program box to set boost timing and turbo timing to zero
    Turnigy 9052000060-0 Trackstar 120A 1/12 Scale One Cell Sensored ESC Gen II 2.02 Use Program box to set boost timing and turbo timing to zero
    Turnigy 9052000082-0 Trackstar 60A Sportsman 2.01 Red LED 1.18 seconds/flash - Always in non timing mode
    Turnigy 9052000047 Trackstar 80A Turbo Stock Class N/A Non Timing: Use program box to set boost timing and turbo timing to zero
    Turnigy 9192000048 Trackstar 120A Turbo Sensored Brushless ESC N/A Yellow LED, 0.42 sec/flash. Use program box to set Boost Timing and Turbo Timing to zero
    Viper RC Solutions 6VSVT01001 Viper VTX1 A55 GREEN LED Blinks on switch box in neutral
    Viper RC Solutions 6VSVT10011 Viper VTX10 A55 GREEN LED Blinks on switch box in neutral
    Viper RC Solutions 6VSVT10015 Viper VTX10 BE A55 GREEN LED Blinks on switch box in neutral
    Viper RC Solutions 6VSVT10R15 Viper VTX10 R A55 GREEN LED Blinks on switch box in neutral
    Viper RC Solutions 6VSVT10R20 Viper VTX10R BE A55 GREEN LED Blinks on switch box in neutral

    ** NOTE: If you find an ESc that is on the ROAR approved list, but don't see it on this list please contact conrc@digitaldetail.ca and let us know so we can review our lists. **