CANADIAN ON-ROAD NATIONALS

March 22 - 25 / 2018

Canadian Onroad Nationals

Touring Car Rules and Specifications


Super Stock (17.5) Modified (Open)
Race Length 5 minute Qualifiers
6 Minute Mains
5 minute Qualifiers
6 Minute Mains
Chassis Any 1/10 scale, 190mm wide, 4wd touring car Any 1/10 scale, 190mm, 4wd touring car
Motor Any approved 17.5 brushless motor with a rotor no bigger than 12.51mm. Approved Motor List Any brushless motor (540 size can)
Speed Control Only ESC's that do not have timing advance settings, or ESC's that have a "spec mode" disabling timing advance and have a blinky light to show it's in that mode. Link to legal ESC's Any Electronic Speed Control
Weight Minimum 1350gr Minimum 1350gr

Tire/Rim

Gravity RC Type C is the Spec Tire for this class (2 sets per class max.). One Set is included with your entry fee for each Touring Car class entered. ** Gravity RC Type C is the Spec Tire for this class (2 sets per class max.). One Set is included with your entry fee for each Touring Car class entered. **
Ride Height Minimum 5mm Minimum 5mm
Batteries Any ROAR approved hard cased 2s, 7.4v nominal LiPo. Batteries can be tested at any time by officials and must not exceed a maximum of 8.44v. Any ROAR approved hard cased 2s, 7.4v nominal LiPo. Batteries can be tested at any time by officials and must not exceed a maximum of 8.44v.
Bodies

Any body that falls within the Global Body Spec parameters for 1/10 Scale, 190mm touring cars.

The overall height of the body, mounted on the chassis, ready to race, is not to be under the minimum height of 115mm from the tech surface. Overall width of must not exceed 195mm.

Wings - Only one wing is allowed, fixed to the same place as the wing on the full-sized vehicle. The rear edge of the wing or side dams may not extend beyond the rear of the body more than 10mm. No part of the wing may extend above the roofline of the body. No part of the wing may extend beyond the sides of the body.

Any body that falls within the Global Body Spec parameters for 1/10 Scale, 190mm touring cars.

The overall height of the body, mounted on the chassis, ready to race, is not to be under the minimum height of 115mm from the tech surface. Overall width of must not exceed 195mm.

Wings - Only one wing is allowed, fixed to the same place as the wing on the full-sized vehicle. The rear edge of the wing or side dams may not extend beyond the rear of the body more than 10mm. No part of the wing may extend above the roofline of the body. No part of the wing may extend beyond the sides of the body.

** A set of tires is included in the entry for for Touring Car classes. Additional sets will be available to purchase at the event for $35/set CAD (taxes included).